Blog Page Banner

Quickly Fix Sage 50 File System Error Number 3- File. DAT

What is Sage 50 File System Error Number 3– File .DAT? You may be tired of looking for the answer to this query. Relax! Take a deep breath since you’ve arrived at the perfect site to discover the correct solution to all of your quotations. The Sage 50 file system error, as its name implies, arises due to a disruption in the company file. The problem prevents you from accessing your company file for a variety of reasons, including a bad connection between the server and system, network barriers, or anything else that is discussed later in this blog.

Therefore, if you are currently experiencing this frustrating circumstance, please proceed down and carefully read the pointer. Because the aforementioned information is readily available to assist you in resolving this issue.Here you go!

What is Sage 50 File System Error Number 3?

The Sage 50 File System Error Number 3 is basically a disk-related problem. The issue is emerging due to disk integrity corruption, file execution policy conflicts or bad sectors. When the Sage 50 file system error enters your system, it will interrupt the Sage accounting system. Such as problems opening and accessing the files. The major indicator of this issue is that the user fails to save the transactions or is not able to open the files, or it might be that their application is freezing in between processing.

What Causes Sage 50 File System Error Number 3- File. DAT

Below are the major causes of Sage 50 File System Error Number 3- File .DAT. Read them thoroughly makes the resolving procedure smooth and effective:

  • When the network connection drops in a wireless environment.
  • Your system is facing a networking glitch.
  • If the w3dbsmgr.exe process ends while you are running Sage 50-US Edition.
  • The system contains a corrupted userpref.dat file.
  • When suddenly your system’s Actian Database pauses or stops.
  • Facing network glitches.
  • The .NET framework does not support your device.
  • There is a connection error to the remote Sage Service host system.
  • Facing an issue after service release installation.
  • When there is a network timeout on the server or host computer.

How You Can Troubleshoot the Sage 50 Error 3

After understanding the reason behind the issue’s emergence, it is the right time to implement the solution and directly target the root cause. There are several methods to troubleshoot the Sage 50 Error 3; however, in this guide, we have compiled the most effective and expertly recommended solution. Users who are not too familiar with the technical aspects of computers can also apply the solution and kick out the error from its roots. Make sure you don’t skip any points.

Solution 1: Check the Network Connection

The main reason for the emergence of Sage 50 File System Error Number 3- File .DAT is the network issue. Then, it must be because of the situation when the workstation and the server are getting disconnected from each other. To fix this, you have to check the network connectivity.

  • Navigate to the guidelines of your network operator to deal with network connectivity issues.
  • Now, change the wireless connection to the wired connection, and check that you are now able to run the Sage application.
  • If yes, then the issue must be with the wireless connection.
  • Here, you have to change the connection to wired.
Alternatively
  • Cross-check the rebooted server.
  • Plug the network router and verify whether the network interface card is in hibernation mode or not.
  • Check the damaged NIC for junk information, corrupted network cables, wireless network errors, and VPNs.
  • There might be other network system interruptions and weak Wi-Fi signals.

Solution 2: Fix the Pervasive Error

If you encounter an error because of the file issue, then by restarting the Pervasive/Actian service, you can easily resolve the problem. To do so, follow the steps mentioned below:

  • Click on the Task Manager and make sure you have closed down all the Sage 50 applications on all the computers.
  • Hit on the Service settings option and search for the Blank Field on the taskbar.
  • Now, right-click on it.
  • Choose the Task Manager window.

Or

  • Press the Ctrl+Alt+Delete keys together.
  • Then, click on the Task Manager Window and click on the option “Details”.
  • Find w3dbsmgr.exe.
  • Next, select the specific process.
  • Go to the bottom of the window and click on the End Task button.
  • Here, you have to search for the Windows button labelled services, find by name, and then look for psqlWGW.
  • Right-click on the service named PsqlWGE.
  • At last, hit on the Start tab and check the status of the Sage 50 File System Error 3.

Solution 3: Place the Windows to Prioritize IPv4 Address Across IPv6

The points listed below help you set the windows to prioritize IPv4 addresses across IPv6 and eliminate Sage 50 File System Error Number 3 quickly.

  • First, you have to search the system notification tray.
  • Now, right-click on the Connection and Perform icon.
  • Hit on the Open Network and Sharing Center window.
  • Here, you will get an NSC interface.
  • In this, you have to click on the connection link, which is required to apply IPv4.
  • This will display the window-named connection status dialog.
  • Then, choose Properties for the new connection.
  • Scroll down the list until the Internet Protocol Version 6 arrives on your screen.
  • Unselect the field and hit the OK tab.
  • Lastly, close the open tab, which will display the IPv4 connection preference.

Solution 4: Fix the Damaged File

In the scenario where the file system error is because of the corrupted files, you have to provide a new name to the file, or you can also run the repair tool on your server. Below, we have shared complete step-by-step guidance; make sure you don’t skip any points. Search the program and data path with the following steps:

  • To do this, first open the Sage 50-US edition.
  • Now, click on the File option and choose the Open Company tab.
  • Here, you have to drag the page corner to display the full directory.
  • After completing the above steps, you will get the data path as the directory minus the truncated company name.
  • Next, you have to follow the instructions to search the program path of the file:
  • Start by clicking on the Sage 50 icon.
  • Hit the window and select the Properties option.
  • Moving ahead, you will see the highlighted path appearing in blue, named peachw.exe, as the program path.
  • When you choose the open file location, it will appear in the program path.
  • Cross-check the data directory to verify the issue by following the below-mentioned steps:
  • Launch the File Explorer page and find the box labeled Search.
  • Click on the All Files & Folders option.
  • Type COMPANY.DAT and make sure that the view adjusts to the Detail button.
  • Click on the Folder selection, which will display the search location.
  • Then, paste it into the data path directory.
  • Lastly, you have to delete the file reference in the data folder named company.

Solution 5: Cross-check the Error in Services

If all the above-stated methods fail to resolve Sage 50 File System Error 3, then there is no need to worry. Simply undertake the below-stated method and check for errors in your services.

  • First, click on the Start button and open Run Windows.
  • Here, a dialogue window will appear to write msconfig.
  • Now, hit the Enter key.
  • Thereon, you will get a prompt named System Configuration Utility Page.
  • Click on the startup option.
  • Select the Disable All tab and click on the OK button.
  • Hit the Restart option and back up the computer.
  • Then, you have to get a prompt message and click on the OK tab.
  • Lastly, run the Sage system verifier and check the status of Sage Error 3.

Solution 6: Check the Workstation IP Address

There might be a chance that you get File System Error Number 3 in Sage 50 because of the wrong IP address. Below are the quick tips to follow to verify and fix your wrong IP address.

  • Start the process by opening a Control Panel window.
  • Now, select the Network and Internet option.
  • Move your cursor to the left corner of the window and hit the change adapter settings option.
  • Thereon, Right-click on it and select the Properties button.
  • Hit on the Internet Protocol Version 4.
  • Then, again, hit the Properties tab.
  • Select the Advanced option and hit the DNS tab.
  • After that, you have to delete the irrelevant entries from the field known as append these DNS suffixes.
  • You can also change the settings to connection-specific and append primary suffixes.
  • Select the field labeled Append parent suffixes to the primary DNS suffix.
  • At last, restart your computer named DNS Client.

End of Walkthrough!

The simple methods provided above to troubleshoot the Sage 50 File System Error message 3 are recommended by our Sage 50 technical team. We believe that implementing them helps you resolve the problem from its roots. In case you find any trouble or want professional advice, then, without delay, connect with your Sage 50 consultant.

Leave a Reply

Your email address will not be published. Required fields are marked *